#BELKIN ROUTER PASSWORD#
#BELKIN ROUTER PC#

You now need to position the extender properly to get the best out of it. The configuration you just completed has now been written to the extender’s firmware.

Once complete, you can complete setup using the same steps above.

Press the WPS button on your wireless router to initiate the handshake.

Press the WPS button on the top until the small light next to it flashes.

Plug the Belkin range extender into an outlet and wait for it to power on.

Then select Next once both bands have been added and complete the process. If you have a dual-band wireless network and want to extend both bands, repeat Step 4 and 5 for both the 2.5GHz and 5GHz bands.

Check the details of the network in the summary page and select Create Extended Network if correct.

#BELKIN ROUTER PASSWORD#

The range extender should connect to the network and require the password to join it.Select the network you want to extend and select Next.The web service will search for available wireless networks and list them. Select the blue Get Started button on the page.If that doesn’t work, try You should see a Belkin setup page appear. Open a browser on the device and navigate to.Use your device to access a wireless network called tup.You can use WPS if you like but I have never had success with it. You will need a phone or tablet to complete setup but you can use a computer if it has WiFi. Once unboxed, plug it into an outlet close to your wireless router and we go from there. If you have problems connecting, make sure that the computer with wireless receiver is close enough to the router, and verify that your USB adapter is installed correctly.Īlso, you may need to try a direct connection with an Ethernet cable, which will allow you to access the router’s login page and customize the wireless security options.The setup process for a Belkin range extender is actually very straightforward.

#BELKIN ROUTER PC#

If you have a wireless router, you will either need a laptop with an integrated wireless card, or you’ll need to buy a USB adapter for your PC to connect to the router, rather than an Ethernet cable.įollow the previous instructions with this slight adjustment. (Here are further instructions for resetting your Belkin router.)įrom this configuration panel, you can enter your ISP’s information, and you can also configure settings such as security protocols, automatic port forwarding, firewall protection, and other features. By inserting a pin into this hole and pressing the button inside, you can turn your router back to the default settings.

If the default password is not working, look for a small hole on the back of your router.

After the login screen comes up, the default username is admin, with no password.

Bring up a browser, and type in the IP address 192.168.2.1.

If you have a static IP address, or need to configure the Belkin router for another reason, you will need to perform the above steps and then log in to the router control panel before connecting to the Internet. Now plug in the cable or DSL line to the back of the modem, and plug the power cords in for both the modem and the router.įinally, turn on your computer and verify that the connection works. (The WAN port may simply be labelled “modem”.) Then run a second Ethernet cable from the modem to the WAN port on the Belkin router. Run the Ethernet cable from your PC or laptop to the first LAN port on the Belkin router. Unplug the Ethernet cable from the modem, and unplug the modem from the wall. If there is no information saved, but your modem requires information to connect, call your ISP or consult their documentation and technical support. You will have to perform this step if you have a static IP address. When trying to connect, if you see a login screen asking for information from your ISP, write down any information that has been saved, If your modem is already connected, simply verify that the connection works. To begin, connect your cable or DSL modem directly to your PC or laptop using an Ethernet cable.

Cable or DSL modem (one that has a functional Internet connection when plugged directly into your PC or laptop.).

To begin setting up your Belkin router, you will need: